Skip to main content
Guide, 7 minute read

RHEL 7 End of Maintenance and CentOS 7 End of Life: Migration Paths

Red Hat Enterprise Linux 7 maintenance and CentOS Linux 7 both ended June 30, 2024. What the RHEL 7 ELS add-on covers through May 31, 2029, the RHEL 8, 9 and 10 dates, and the upgrade, conversion and rebuild paths.

Planning guidesIT managers and Linux system owners running Red Hat Enterprise Linux 7 or CentOS Linux 7 servers, physical or virtualBy , Founder and CEO, Days Dynamics. Published November 10, 2026.

RHEL 7 maintenance and CentOS Linux 7 both ended June 30, 2024

Red Hat Enterprise Linux (RHEL) 7 reached end of maintenance on June 30, 2024, and CentOS Linux 7 reached end of life the same day. Red Hat says RHEL 7 is not at end of life: RHEL 7.9 systems can still get selected fixes through the Extended Life Cycle Support (ELS) add-on, available through May 31, 2029. CentOS Linux 7 gets no further updates. Plan to move both to RHEL 8, 9, or 10.

RHEL and CentOS lifecycle dates

The dates below are as Red Hat and the CentOS Project publish them, checked November 2026. Red Hat says future end of full support and end of maintenance dates are close approximations and subject to change.

Product or versionMilestone (vendor term)DateSource
RHEL 7End of maintenance supportJune 30, 2024Red Hat: RHEL 7 end of maintenance
RHEL 7.9Extended Life Cycle Support (ELS) add-onJuly 1, 2024 to May 31, 2029Red Hat RHEL 7 FAQ
RHEL 8Full support endedMay 31, 2024Red Hat Product Life Cycles
RHEL 8Maintenance support endsMay 31, 2029Red Hat Product Life Cycles
RHEL 8Extended life cycle support (ELS) add-on endsMay 31, 2033Red Hat Product Life Cycles
RHEL 9Full support endsMay 31, 2027Red Hat Product Life Cycles
RHEL 9Maintenance support endsMay 31, 2032Red Hat Product Life Cycles
RHEL 9Extended life cycle support (ELS) add-on endsMay 31, 2036Red Hat Product Life Cycles
RHEL 10Full support endsMay 31, 2030Red Hat Product Life Cycles
RHEL 10Maintenance support endsMay 31, 2035Red Hat Product Life Cycles
CentOS Linux 7End of LifeJune 30, 2024CentOS Project blog
CentOS Stream 8End of BuildsMay 31, 2024CentOS Project blog
CentOS Linux 8End of LifeDecember 31, 2021CentOS Project

A change to extended support for RHEL 8 and later

Red Hat's lifecycle policy says Extended Life Cycle Premium (ELCP) replaces the ELS offering beginning with RHEL 8.10 on June 1, 2029. Confirm the offering name and terms with Red Hat before you budget an extension past maintenance support.

What changed on June 30, 2024

On June 30, 2024, RHEL 7 moved from the Maintenance Phase to the Extended Life Phase, and CentOS Linux 7 stopped receiving updates. What a system still gets depends on which of the two it runs and whether RHEL 7 has the ELS add-on.

RHEL 7 without ELS

Red Hat says end of maintenance means losing access to critical and important impact security advisories (RHSAs) and urgent priority bug fix advisories (RHBAs). In the Extended Life Phase, Red Hat states that no bug fixes, security fixes, hardware enablement, or root-cause analysis are available.

RHEL 7.9 with ELS

ELS is supported only on the last minor release, RHEL 7.9. Red Hat describes it as maintenance for certain Critical, Important, and Moderate CVEs with a CVSS score of 7 or higher, selected urgent priority bug fixes at Red Hat's discretion, and technical support.

CentOS Linux 7

The CentOS Project said no updates would be published for CentOS Linux 7 after June 30, 2024, and that its packages would be archived on vault.centos.org. For systems that could not move in time, the CentOS Project pointed to converting to RHEL 7 and adding ELS.

Your options for RHEL 7 and CentOS Linux 7

OptionWhat it involvesUsually fits when
Upgrade in place to RHEL 8 with LeappThe Leapp utility replaces RHEL 7 with RHEL 8 on the same system. Red Hat lists RHEL 7.9 to RHEL 8.10 as the supported pathThe hardware, hypervisor, and applications support RHEL 8 and the system is worth keeping
Upgrade twice to reach RHEL 9Red Hat does not support a direct upgrade from RHEL 7 to RHEL 9. Upgrade to RHEL 8.10 first, then to RHEL 9.6 (with EUS) or RHEL 9.8The application needs RHEL 9 and a rebuild is hard to schedule
Convert CentOS Linux 7 with Convert2RHEL, then upgradeConvert2RHEL replaces CentOS Linux 7.9 packages with RHEL 7.9 packages. The converted system then takes the Leapp path to RHEL 8A CentOS Linux 7 server is still in use and rebuilding it would take longer
Stay on RHEL 7.9 with ELS for nowAdd the ELS add-on for selected fixes through May 31, 2029 while the move is plannedAn application cannot move yet and the system must keep receiving selected fixes
Rebuild on RHEL 9 or RHEL 10Install a new system on a current release, then migrate the applications and data and cut overThe hardware is also aging, or the system has drifted far from a clean build
Retire or consolidateArchive the data and shut the system down, or move its job onto a supported serverThe application is no longer used or does little on its own server

See the Enterprise infrastructure modernization and the Replace the server or move to Azure.

How CentOS Linux 7 gets to a supported release

Red Hat's Leapp upgrade starts from RHEL 7.9, so a CentOS Linux 7 server is converted to RHEL 7.9 first, or rebuilt. Red Hat's Convert2RHEL documentation sets out the order.

  • Convert first. Convert2RHEL replaces all RPM packages from the original distribution with their RHEL versions. Red Hat lists CentOS Linux 7.9 to RHEL 7.9 as a supported conversion.
  • Then upgrade in steps. Red Hat says a system converted to RHEL 7 must first be upgraded in place to RHEL 8 before it can move to RHEL 9.
  • Add ELS only if the system stays on RHEL 7. Red Hat says an ELS subscription is not needed if you convert to RHEL 7 and then immediately upgrade to RHEL 8 or later.
  • Back up before you start. Red Hat says to back up the system and verify that it can be restored if needed.

How to plan the move

  • Inventory every RHEL 7 and CentOS Linux 7 system: minor release, physical or virtual, the applications on it, and who owns them.
  • Ask each application vendor which RHEL versions they support. Their answer often decides between RHEL 8, 9, and 10.
  • Compare target dates. RHEL 8 maintenance support ends May 31, 2029, and RHEL 9 maintenance support ends May 31, 2032. Red Hat recommends upgrading RHEL 7 to RHEL 9 or 10.
  • Pick one path per system: upgrade in place, convert then upgrade, rebuild, bridge with ELS, or retire.
  • Take a full backup or a virtual machine snapshot, then run the Leapp pre-upgrade report. Red Hat says to review the entire report even when it finds no inhibitors.
  • Test on a copy first, schedule the cutover with a rollback plan, and run a test restore on the new release.

See the Infrastructure End-of-Support Assessment and the Backup and disaster recovery.

Frequently asked questions

Is RHEL 7 end of life?

No. Red Hat says RHEL 7 reached end of maintenance on June 30, 2024, but is not reaching end of life. It is in the Extended Life Phase, and RHEL 7.9 can get selected fixes through the ELS add-on through May 31, 2029.

When did CentOS Linux 7 reach end of life?

CentOS Linux 7 reached end of life on June 30, 2024. The CentOS Project said no updates would be published after that date and that the packages would be archived on vault.centos.org.

Can RHEL 7 be upgraded directly to RHEL 9?

No. Red Hat says a direct in-place upgrade from RHEL 7 to RHEL 9 is not possible. Upgrade from RHEL 7.9 to RHEL 8.10 with Leapp, then run a second in-place upgrade to RHEL 9, or rebuild on RHEL 9.

Can a CentOS Linux 7 server be upgraded with Leapp?

Not with Red Hat support. Red Hat's supported Leapp path starts from RHEL 7.9. Convert the server from CentOS Linux 7.9 to RHEL 7.9 with Convert2RHEL first, then upgrade it to RHEL 8.

Which RHEL release should we move to?

Red Hat recommends RHEL 9 or 10 for systems leaving RHEL 7. RHEL 8 is the only in-place target from RHEL 7, and its maintenance support ends May 31, 2029, so a move to RHEL 8 can be one step on the way to RHEL 9.

Map every RHEL 7 and CentOS Linux 7 system to a path

Send us the RHEL 7 and CentOS Linux 7 systems you run, the applications on them, and the hardware or hypervisor under them. We will map each one to an upgrade, conversion, rebuild, or retirement path and a sequence for the work. A planning call is planning support, not a quote, an audit, or a commitment on licensing, availability, or delivery dates.

Sources

Primary sources checked when this guide was written. Dates and product status can change, so confirm on the source before you rely on them.

Planning this project now?

Turn the checklist into a plan

The 2-minute IT quiz turns this checklist into ranked priorities for your situation, before any contact details.